Address: 4050 N Interstate Dr, Norman, OK 73072
Open: Monday-Friday 7am-7pm | Saturday 8am-5pm
Keep your Toyota performing at its best with factory-trained technicians, genuine Toyota parts, and expert service built for long-term reliability. Schedule your next oil change, maintenance, repair, or service appointment at Fowler Toyota of Norman today.
View Warranty & Extended Protection Plans: The Toyota Warranty
Toyota recommends following the maintenance schedule for your specific Sequoia based on mileage and time. Scheduled maintenance commonly includes service at 5,000-mile or 6-month intervals, whichever comes first.
Routine maintenance may include:
Exact requirements vary by model year, drivetrain, mileage, and driving conditions. Check the owner’s manual and Toyota Warranty and Maintenance Guide for your specific Sequoia.
Under normal operating conditions, Toyota’s maintenance documentation specifies an oil and filter change at 10,000 miles or 12 months when the specified 0W-20 oil is used.
More frequent oil changes may be required under certain special operating conditions. Always follow the maintenance schedule for your specific model year.
Toyota identifies certain special operating conditions that can require oil and filter replacement every 5,000 miles or 6 months, including:
The Sequoia i-FORCE MAX uses a 3.4-liter twin-turbo V6 hybrid powertrain. Toyota maintenance documentation for recent Sequoia models specifies SAE 0W-20 motor oil.
Check the owner’s manual for the exact oil specification for your model year.
The Sequoia i-FORCE MAX uses separate cooling systems for the engine and hybrid components.
Coolant replacement intervals depend on the specific model year and cooling system. Refer to the Toyota Warranty and Maintenance Guide for the correct replacement schedule.
The Sequoia uses a 10-speed automatic transmission. Transmission fluid inspection and replacement requirements depend on the vehicle’s maintenance schedule and operating conditions.
Vehicles frequently used for towing or heavy loading may have additional service requirements. Check the owner’s manual for the correct fluid specification and service interval.
Four-wheel-drive Sequoia models have additional drivetrain components that may require inspection and fluid service.
Service requirements can vary based on drivetrain configuration and operating conditions, including towing and off-road use.
Spark plug replacement is a scheduled maintenance item for the Sequoia’s twin-turbo V6 engine.
The exact replacement interval can vary by model year. Check the applicable Toyota Warranty and Maintenance Guide before scheduling service.
The Sequoia i-FORCE MAX uses a high-voltage hybrid battery system with dedicated cooling components.
Maintenance can include inspection of the hybrid battery cooling air intake and related components. Keep the cooling intake area free of dust, lint, pet hair, and other debris.
If a hybrid battery cooling warning appears, follow the owner’s manual instructions or have the vehicle inspected by a qualified Toyota technician.
The Sequoia i-FORCE MAX uses regenerative braking to recover energy during deceleration.
Regenerative braking can reduce the amount of work performed by the conventional friction brakes during some driving conditions. Brake pad and rotor wear still depends on driving habits, traffic, vehicle load, road conditions, and other factors.
Have the braking system inspected according to Toyota’s maintenance schedule.
For the 2027 Toyota Sequoia, Toyota says ToyotaCare covers normal factory-scheduled maintenance for 1 year or 10,000 miles, whichever comes first.
Toyota also provides 2 years of unlimited-mileage roadside assistance.
ToyotaCare coverage can vary by model year, so owners of earlier Sequoia models should verify the coverage that applies to their vehicle.
Toyota does not generally list a 1,000-mile oil change as a standard scheduled maintenance requirement.
Follow the break-in instructions in the owner’s manual and perform oil service according to the applicable factory maintenance schedule.
An earlier oil change may be performed as customer-paid maintenance, but owners should confirm with the dealer whether an early service is covered by ToyotaCare.
Recall coverage depends on the model year, production date, equipment, and VIN.
Certain 2023 and 2024 Sequoia Hybrid vehicles were included in a safety recall involving unexpected vehicle movement while the transmission was in Neutral. The remedy involved updating the transmission control computer software.
Certain 2023 and 2024 Sequoia vehicles were also included in a recall involving the rear tow hitch cover.
Recall status should be checked by VIN through Toyota or NHTSA because not every vehicle from an affected model year is necessarily included.
Certain 2023 and 2024 Sequoia vehicles were included in NHTSA recall 24V-640 / Toyota recall 24TA10 involving the rear tow hitch cover.
The affected cover could separate from the vehicle while driving. Toyota’s recall remedy addressed the retention of the cover.
Owners should check their VIN to determine whether their vehicle is affected and whether the recall repair has been completed.
Certain 2023 and 2024 Sequoias were subject to a safety recall involving the 10-speed automatic transmission.
Affected vehicles could potentially move while the transmission was in Neutral if the brake or parking brake was not applied.
The recall remedy involved updating the transmission control software. Owners should verify recall status by VIN.
The Sequoia uses both a high-voltage hybrid battery and a conventional 12-volt battery.
The 12-volt battery powers many vehicle electrical systems. If the vehicle will be parked for an extended period, follow the storage recommendations in the owner’s manual.
If the 12-volt battery repeatedly loses charge, have the vehicle inspected by a qualified Toyota technician.
Underbody protection can affect access to certain service components on some Sequoia configurations.
The exact procedure depends on the model year, trim, drivetrain, and installed equipment. Owners performing their own maintenance should follow the applicable service procedure and use appropriate lifting and safety equipment.
If you are unsure which panels or shields need to be removed, consult the owner’s manual or a certified Toyota technician.
Address: 4050 N Interstate Dr, Norman, OK 73072
Phone: 1-405-322-5799
Open: Monday-Friday 7am-7pm | Saturday 8am-5pm
Get Toyota Service
Shop Toyota Lineup Now
Disclaimers
Disclosure & Maintenance Disclaimer: This page is provided for general informational purposes only and is not a guarantee of maintenance costs, service requirements, or vehicle performance.
Toyota Sequoia maintenance schedules, service intervals, repair needs, warranty coverage, and estimated costs may vary based on model year, trim, powertrain, mileage, driving conditions, and vehicle history. Severe driving conditions, including towing, frequent short trips, dusty roads, off-road driving, and extreme temperatures, may require additional maintenance.
Maintenance recommendations are based on Toyota guidelines and information available at the time of publication and are subject to change without notice. Service pricing, parts availability, and offers may vary.
ToyotaCare and warranty coverage are subject to eligibility, terms, conditions, and exclusions. Always consult your Owner’s Manual or a Toyota service professional for vehicle-specific recommendations.
Contact Fowler Toyota for current service information, pricing, and appointment availability.
